





Custom Glass & Shower Doors
Starting at $999
- We Come to YouOn-site measurement at your home
- Free EstimatesFirm written pricing, no obligation
- Fast TurnaroundClear timelines from measure to install
- Expert InstallationFabricated and installed by one team
Custom Frameless Shower Doors for Chicago Homes
We fabricate and install frameless shower doors across Chicago. Heavy tempered glass, minimal hardware, and no metal framing around the panels.
Frameless is the style most people picture when they picture a custom shower. The glass carries itself, held by hinges and clamps rather than a surrounding frame, and the enclosure nearly disappears into the room. In a small Chicago bathroom that visual weight matters more than square footage does.
It is also the least forgiving installation we do. Half-inch glass is heavy, the hardware has to anchor into real structure, and nothing about the panel can be adjusted after it leaves fabrication. Which is why we measure the opening ourselves before anything is cut.
Get a Quote
Our Frameless Shower Door Options
We design and install frameless shower doors and enclosures throughout Chicago and the surrounding suburbs,with every panel cut to a single opening.
What Makes Frameless Different to Install
Frameless doors use thicker glass than framed or semi-frameless units, usually three-eighths or one-half inch. A single panel can weigh well over a hundred pounds, and all of that load transfers into the wall through a few small hinges.
That means anchoring into studs or proper blocking, not drywall anchors. If your bathroom is still in framing, adding blocking behind the tile is inexpensive and solves the problem permanently. If the walls are already closed, we locate structure during the measurement and design the hardware layout around what is actually there.
Why Frameless Works Well in Chicago Bathrooms
Chicago’s housing stock skews small in the bathroom. Bungalows, two-flats, and greystones were built with compact baths, and most of them still are compact even after a remodel.
Frameless helps there in a way that is hard to overstate. Metal framing creates visual lines that chop a small room into sections. Take the framing away and the eye reads the whole space at once, including the tile behind the glass. A five-by-eight bathroom does not gain a square foot, but it stops feeling boxed in.
There is a practical side too. Framed enclosures collect soap scum and hard water in the tracks, and Chicago water is hard enough to make that a weekly chore. Frameless has no tracks. A squeegee and a few seconds after each shower keeps the glass clear.
Compare Shower Door Types
We fabricate and install frameless, semi-frameless, and sliding glass shower doors, along with fixed panels for walk-in showers. Here is how the four compare on the factors that matter most when choosing.
| Feature | Frameless | Semi-Frameless | Sliding | Fixed Panel |
|---|---|---|---|---|
| Glass Thickness | 3/8 in or 1/2 in | 1/4 in or 3/8 in | 1/4 in to 3/8 in | 3/8 in or 1/2 in |
| Framing | None, hinges and clamps only | Slim perimeter, open door panel | Framed or slim framed on track | None, wall channel or clamps |
| Swing Clearance Needed | Yes, roughly door width | Yes, roughly door width | None | None |
| Handles Uneven Walls | Least tolerance | Most tolerance | Good tolerance | Limited tolerance |
| Cleaning and Upkeep | Easiest, no tracks | Wipe framing regularly | Bottom track collects buildup | Easiest, no moving parts |
| Wall Anchoring | Studs or blocking required | Standard anchoring | Standard anchoring | Studs or blocking required |
| Best Suited To | Renovated baths with true walls | Older homes, settled openings | Tub alcoves and tight bathrooms | Walk-in and curbless showers |
| Relative Cost | Highest | Mid range | Most affordable | Varies with panel size |
Custom shower doors start at $999. Every enclosure is templated on-site and fabricated to your opening, so the right choice depends on your bathroom rather than on the chart alone. Call (708) 808-7775 for a free on-site estimate.
Is Frameless the Right Choice for Your Bathroom?
Frameless is not automatically the right answer, and we will tell you when it is not.
If your walls have settled noticeably out of plumb, which happens constantly in pre-war Chicago buildings, a frameless panel has no framing to absorb that variance. We can still fabricate to the condition, but semi-frameless sometimes produces a better seal for less money. If your vanity or toilet sits close enough that a swinging door would hit it, a sliding enclosure is the practical answer regardless of how the frameless would look. And if the budget is tight, semi-frameless gets you most of the visual openness at a lower price.
We would rather point you to the right enclosure than sell you the expensive one and hear about it later.
How We Price Frameless Enclosures
Custom shower doors start at $999, with frameless sitting above that entry point because the glass is thicker and the hardware carries more weight. The number moves with glass thickness, hardware finish, and how complex the opening is. A single hinged door across a standard alcove is the least expensive frameless configuration. A door with a fixed panel costs more. Neo-angle corners and steam enclosures cost more again, since they involve more glass, more hardware, and more precise fabrication. You get one firm written number after the on-site measurement.
Booking a Frameless Installation
Call us and we schedule a free on-site measurement at your Chicago home. We check the opening, look at how true the walls run, find where we can anchor, and talk through hardware finishes and configuration. If frameless is not the best fit for your bathroom, you will hear that at this stage rather than after you have paid for it.
Once you approve the quote, your glass goes into fabrication at your exact measurements. We call to schedule installation when it is ready. Our crew handles the install, sets and seals the panels, removes the old enclosure if there was one, and walks the finished shower with you before leaving.
How Our Process Works
Request a Quote
Contact us to tell us about your project and schedule your free consultation.
Measure & Plan
We measure your space and create a custom plan tailored to your needs.
Custom Fabrication
Your glass and hardware are precision-fabricated to exact specifications.
Professional Installation
Our expert installers deliver a flawless finish and ensure your complete satisfaction.






























