Glass shower door installation in Downers Grove
Glass shower door installation in Burbank
Semi-frameless shower doors
Custom glass shower doors
Glass shower installation in Alsip
Glass shower door installation in Lincolnshire, IL

Custom Glass & Shower Doors

Starting at $999

Frameless Semi-Frameless Sliding Glass Walls & Panels Custom Mirrors
  • We Come to YouOn-site measurement at your home
  • Free EstimatesFirm written pricing, no obligation
  • Fast TurnaroundClear timelines from measure to install
  • Expert InstallationFabricated and installed by one team
Call Now: (708) 808-7775

Custom Frameless Shower Doors for Chicago Homes

We fabricate and install frameless shower doors across Chicago. Heavy tempered glass, minimal hardware, and no metal framing around the panels.

Frameless is the style most people picture when they picture a custom shower. The glass carries itself, held by hinges and clamps rather than a surrounding frame, and the enclosure nearly disappears into the room. In a small Chicago bathroom that visual weight matters more than square footage does.

It is also the least forgiving installation we do. Half-inch glass is heavy, the hardware has to anchor into real structure, and nothing about the panel can be adjusted after it leaves fabrication. Which is why we measure the opening ourselves before anything is cut.

Get a Quote

Our Frameless Shower Door Options

We design and install frameless shower doors and enclosures throughout Chicago  and the surrounding suburbs,with every panel cut to a single opening.

Shower Doors in Chicago

Single Frameless Doors

One hinged glass panel across a standard alcove. The most direct frameless configuration and typically the least expensive way into the style.

Shower Doors in Chicago

Door and Fixed Panel Combinations

A hinged door paired with a stationary panel, used when the opening is wider than a single door can span. The most common frameless setup we install.

chicago glass shower door installation

Neo-Angle and Corner Enclosures

Three-panel configurations for corner showers, with the door set at an angle between two fixed panels. Common in newer construction with larger master baths.

Custom Glass Walls, Railings & Room Dividers

Walk-In and Doorless Panels

A single fixed panel with no door at all, relying on shower depth and drain placement to control water. Clean, low-maintenance, and dependent on the shower being designed for it.

chicago glass shower door installation

What Makes Frameless Different to Install

Frameless doors use thicker glass than framed or semi-frameless units, usually three-eighths or one-half inch. A single panel can weigh well over a hundred pounds, and all of that load transfers into the wall through a few small hinges.

That means anchoring into studs or proper blocking, not drywall anchors. If your bathroom is still in framing, adding blocking behind the tile is inexpensive and solves the problem permanently. If the walls are already closed, we locate structure during the measurement and design the hardware layout around what is actually there.

  • Three-eighths or half-inch tempered safety glass

  • Hardware anchored into studs or blocking, never drywall alone

  • Hinge and clamp placement planned before fabrication begins

Why Frameless Works Well in Chicago Bathrooms

Chicago’s housing stock skews small in the bathroom. Bungalows, two-flats, and greystones were built with compact baths, and most of them still are compact even after a remodel.

Frameless helps there in a way that is hard to overstate. Metal framing creates visual lines that chop a small room into sections. Take the framing away and the eye reads the whole space at once, including the tile behind the glass. A five-by-eight bathroom does not gain a square foot, but it stops feeling boxed in.

There is a practical side too. Framed enclosures collect soap scum and hard water in the tracks, and Chicago water is hard enough to make that a weekly chore. Frameless has no tracks. A squeegee and a few seconds after each shower keeps the glass clear.

chicago glass shower door installation

Compare Shower Door Types

We fabricate and install frameless, semi-frameless, and sliding glass shower doors, along with fixed panels for walk-in showers. Here is how the four compare on the factors that matter most when choosing.

Comparison of frameless, semi-frameless, sliding, and fixed panel shower enclosures
FeatureFramelessSemi-FramelessSlidingFixed Panel
Glass Thickness3/8 in or 1/2 in1/4 in or 3/8 in1/4 in to 3/8 in3/8 in or 1/2 in
FramingNone, hinges and clamps onlySlim perimeter, open door panelFramed or slim framed on trackNone, wall channel or clamps
Swing Clearance NeededYes, roughly door widthYes, roughly door widthNoneNone
Handles Uneven WallsLeast toleranceMost toleranceGood toleranceLimited tolerance
Cleaning and UpkeepEasiest, no tracksWipe framing regularlyBottom track collects buildupEasiest, no moving parts
Wall AnchoringStuds or blocking requiredStandard anchoringStandard anchoringStuds or blocking required
Best Suited ToRenovated baths with true wallsOlder homes, settled openingsTub alcoves and tight bathroomsWalk-in and curbless showers
Relative CostHighestMid rangeMost affordableVaries with panel size

Custom shower doors start at $999. Every enclosure is templated on-site and fabricated to your opening, so the right choice depends on your bathroom rather than on the chart alone. Call (708) 808-7775 for a free on-site estimate.

Ready for Custom Glass Designed for Your Space?

Get a free on-site estimate for professionally measured, custom-fabricated, and expertly installed glass.

Is Frameless the Right Choice for Your Bathroom?

Frameless is not automatically the right answer, and we will tell you when it is not.

If your walls have settled noticeably out of plumb, which happens constantly in pre-war Chicago buildings, a frameless panel has no framing to absorb that variance. We can still fabricate to the condition, but semi-frameless sometimes produces a better seal for less money. If your vanity or toilet sits close enough that a swinging door would hit it, a sliding enclosure is the practical answer regardless of how the frameless would look. And if the budget is tight, semi-frameless gets you most of the visual openness at a lower price.

We would rather point you to the right enclosure than sell you the expensive one and hear about it later.

glass shower door installation near me amg project
Contact Us-glass shower doors Orland Park

How We Price Frameless Enclosures

Custom shower doors start at $999, with frameless sitting above that entry point because the glass is thicker and the hardware carries more weight. The number moves with glass thickness, hardware finish, and how complex the opening is. A single hinged door across a standard alcove is the least expensive frameless configuration. A door with a fixed panel costs more. Neo-angle corners and steam enclosures cost more again, since they involve more glass, more hardware, and more precise fabrication. You get one firm written number after the on-site measurement.

Booking a Frameless Installation

Call us and we schedule a free on-site measurement at your Chicago home. We check the opening, look at how true the walls run, find where we can anchor, and talk through hardware finishes and configuration. If frameless is not the best fit for your bathroom, you will hear that at this stage rather than after you have paid for it.

Once you approve the quote, your glass goes into fabrication at your exact measurements. We call to schedule installation when it is ready. Our crew handles the install, sets and seals the panels, removes the old enclosure if there was one, and walks the finished shower with you before leaving.

Lincolnshire glass shower doors

How Our Process Works

1

Request a Quote

Contact us to tell us about your project and schedule your free consultation.

2

Measure & Plan

We measure your space and create a custom plan tailored to your needs.

3

Custom Fabrication

Your glass and hardware are precision-fabricated to exact specifications.

4

Professional Installation

Our expert installers deliver a flawless finish and ensure your complete satisfaction.

Gallery

Frequently Asked Questions

Custom shower doors start at $999, with frameless above that entry point because of the thicker glass and heavier hardware. Configuration drives the rest, since a single hinged door costs less than a door with a fixed panel, and neo-angle or steam enclosures cost more again. We quote a firm number after measuring.

Frameless enclosures typically use three-eighths or one-half inch tempered glass. The thickness is structural, since the glass carries its own weight without a frame supporting it. We specify the right thickness for your panel size at the measurement.

Yes. Frameless enclosures use tempered safety glass, which is heat-treated so that if it does break it fragments into small blunt pieces rather than sharp shards. It is the same standard required for shower glass generally.

A properly designed frameless enclosure controls water through panel placement, door swing direction, and the shower’s own slope and drain position, not through a watertight seal. When frameless leaks it is almost always a design or installation issue rather than a limitation of the style. This is a large part of why the measurement and layout planning matter.

The hardware needs to anchor into studs or blocking rather than drywall anchors alone, because of the glass weight. If you are still framing, add blocking then. If the walls are closed, we locate structure during the measurement and lay out the hardware accordingly.

Easier, generally. Framed and semi-framed enclosures have metal tracks and channels where soap scum and hard water deposits collect. Frameless has no tracks. Squeegeeing after each shower and cleaning with a non-abrasive glass cleaner keeps it clear.

Often yes, though it depends how far out the walls run. We template the opening before fabrication and cut to actual conditions. Where the variance is significant, we may recommend semi-frameless instead, since the perimeter framing gives more tolerance and can produce a better result.

Contact Information

Call or Text (708) 808-7775
Showroom Hours Mon–Sat, 8 AM–6 PM
4711 W 135th St, Crestwood, IL 60418 Directions