We fabricate and install glass and shower doors in Worth. Frameless enclosures, semi-frameless doors, sliding glass panels, and cut-to-size mirrors. Glass is the only trade we work in.

Worth is a small village with a dense residential core, and most of its housing dates to a concentrated stretch in the middle of the last century. That means a lot of modest ranches and bungalows with a single full bath and a standard tub alcove along the back wall.

Those alcoves look interchangeable and they are not. Decades of settling leave openings that taper from ceiling to floor, sometimes by a quarter inch or more. Tempered glass has no ability to flex into that, so we measure your alcove before a single panel gets cut.

We handle measurement, fabrication, and installation of frameless, semi-frameless, and sliding glass shower doors, custom enclosures, and mirrors for homes across Worth and the neighboring southwest suburbs.

The single most requested job we do in Worth costs less than people assume. Take down the curtain rod, put in a bypass sliding enclosure sized to the alcove, and the bathroom reads finished.

There is no demolition involved. The tub stays, the tile stays, the plumbing is untouched. We measure the alcove, fabricate the panels to it, and set them in one visit. For a homeowner who is not ready to gut a bathroom, it is the highest-impact change available.

Two things shape nearly every recommendation we make in Worth: how tight the bathrooms are, and how much the openings have moved.

On clearance, the math is unforgiving. A hinged shower door needs roughly its own width of open floor to swing. Put a vanity three feet from the tub, which is standard here, and a thirty-inch door will make contact. We see the proof on replacement calls constantly, in the form of chipped vanity corners from years of a swing door hitting the same spot. Sliding glass shower doors move within the opening instead, which sidesteps the problem entirely.

On the openings themselves, sixty years of settling is enough to throw an alcove noticeably out of plumb. Semi-frameless framing spans that variance and holds a seal. Frameless glass has nothing to absorb it with, which is why we measure first and recommend second rather than the other way around.

Because sliding enclosures dominate here, most of our Worth repair calls come down to tracks and rollers.

The failure pattern is predictable. Hard water deposits and soap scum accumulate in the bottom track, the rollers grind through that grit, and after a few years the panels drag or come off the track altogether. A fair number of those are solved with cleaning and adjustment. The rest need new rollers, which still costs a small fraction of a new enclosure.

We also handle sweeps that hardened and now let water onto the floor, hinges that drifted on semi-frameless units, and single-panel glass replacement where the frame is still sound. When we cannot help is when the hardware line is discontinued and parts are genuinely unavailable. In that case a workaround buys a few months at best, and you deserve to hear that before paying for it.

Custom shower doors start at $999. Three factors move that number: glass thickness, hardware finish, and how complicated the opening is. Sliding glass shower doors and semi-frameless enclosures over a standard tub alcove sit right at that entry point, and that covers the majority of Worth bathrooms. Frameless costs more because the glass is thicker and the hardware carries the full panel weight. Walk-in configurations with fixed panels cost more again, since they involve more glass and more precise fabrication. You get one firm written number after the on-site measurement, and it does not change on install day.

Call and we set up a free on-site measurement at your Worth home. We measure the alcove, check how true the walls run, and talk through whether sliding, semi-frameless, or frameless glass shower doors are right for the room and the budget. If a slider is the better call because your vanity crowds the tub, that is what we will recommend even though a hinged frameless door would cost you more.

Once the quote is approved, your glass goes into fabrication cut to your measurements. We call to schedule installation when it is ready. Most enclosures are set within a few hours. We take the old shower door or curtain rod with us, clean up, and walk the finished enclosure with you before we leave.